| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: 3–6 leaves unfolded The application time should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ Spring: tillering The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇/◆ stem elongation The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇/◆ flag leaf stage / beginning of heading The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization. |
AMINO ULTRA Zn SL
AMINO ULTRA® Zn SL is an innovative, liquid micronutrient fertilizer intended for foliar feeding of of all types of crops. The fertilizer quickly and efficiently provides plants with zinc.
DESCRIPTION
AMINO ULTRA® Zn SL is based on the patented GCAA technology, in which micronutrients are bonded with the amino acid – glycine. Glycine is the smallest and the most mobile amino acid in plants. Therefore, the micronutrients bonded with glycine ensure faster and more effective plant nutrition than mineral salts, oxides or fertilizers based on other complexing agents.
AMINO ULTRA® Zn SL – BENEFITS
AMINO ULTRA® Zn SL owes its effectiveness to GCAA Technology
AMINO ULTRA® Zn SL – COMPOSITION
| COMPOSITION | g/L | % (m/m) |
| Water-soluble zinc (Zn) as glycinate | 121 | 9.2 |
 |
AMINO ULTRA® Zn SL is registered for use in organic agriculture in accordance with Regulation (EU) No. 2018/848. and is on the list – www.inputs.eu. |
AMINO ULTRA® Zn SL – APPLICATION
AMINO ULTRA® Zn SL is intended for foliar application for plants with high requirements for zinc. The fertiliser provides plants with zinc quickly and effectively. It is recommended especially for weakened plants that need regeneration.
AMINO ULTRA® Zn SL works perfectly even in difficult growing conditions and is completely safe for the natural environment. It is essential in the case of soil conditions that limit the availability of zinc for plants (high pH, high phosphorus content, lack of oxygen in the root zone).
When used as an intervention, it effectively eliminates zinc deficiency and limits the negative effects of periodic deficiency.
AMINO ULTRA® Zn SL – LEARN MORE
FREQUENTLY ASKED QUESTIONS – FAQ
| What is AMINO ULTRA® Zn SL? |
AMINO ULTRA® Zn SL is an innovative foliar iron fertilizer for all types of crops. It is distinguished by the use of GCAA technology, in which zinc is complexed by the amino acid glycine, which ensures fast and effective absorption of the nutrient by plants.
| What is the role of glycine in AMINO ULTRA® Zn SL? |
Glycine is the smallest and the most mobile amino acid, so it facilitates fastand effective uptake of micronutrients by plants compared to traditional fertilizers based on salts, oxides or other complexing agents.
| In what conditions it is highly recommended to apply AMINO ULTRA® Zn SL? |
Zn-24 is recommended in the case of soil conditions that limit the availability of zinc for plants (high pH, high phosphorus content, lack of oxygen in the root zone).
It is recommended especially for weakened plants that need regeneration.
| How does AMINO ULTRA® Zn SL affect plants? |
Zinc is involved in the synthesis of auxins, hormones responsible for plant growth and development. Additionally, it increases the efficiency of nitrogen fertilization and stimulates the development of flower and leaf buds.
Additional Information
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf development – tillering The application time should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ stem elongation The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high as well as with high nitrogen fertilization and in case of low air and soil temperature.Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇/◆ flag leaf stage / beginning of heading The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization. |
|
| ◇/◆ flag leaf stage / beginning of heading The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: 3–6 leaves unfolded The application time should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ Spring: continuation of tillering The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇/◆ stem elongation The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇ flag leaf stage / beginning of heading |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf development – tillering The application time should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ stem elongation The application time should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇ flag leaf stage / beginning of heading |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆/◇ Autumn: leaf development – until beginning of tillering The treatment should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◆/◇ Spring: beginning of stem elongation The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◆/◇ flag leaf stage – until first awns visible The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆/◇ leaf development – until beginning of stem elongation The treatment should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◆/◇ flag leaf stage – until first awns visible The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high, as well as with high nitrogen fertilization and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ Autumn: leaf development – until beginning of tillering The treatment should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ Spring: beginning of stem elongation The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
|
| ◇/◆ flag leaf stage – until first awns visible The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf development – until beginning of stem elongation The treatment should be considered as optimal in case of soils with a pH above 6.5 and when soil phosphorus content is high, as well as when sowing was late and in case of delayed plant emergence. |
Single dose – 0.4–1.2 L/ha |
| ◇/◆ flag leaf stage – until first awns visible The treatment should be considered as optimal in case of soils with a pH above 6.5, when phosphorus content in soil is high and in case of low air and soil temperature. Warning! – please note that high zinc fertilization may reduce resistance of grain crops to powdery mildew. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ Autumn: leaf development – until beginning of tillering | Single dose – 0.4–1.2 L/ha |
| ◇ Spring: beginning of steam elongation | |
| ◇ flag leaf stage – until beginning of heading |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ leaf development – until beginning of steam elongationg | Single dose – 0.4–1.2 L/ha |
| ◇ flag leaf stage – until beginning of heading |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ leaf development – tillering | Single dose – 0.4–1.2 L/ha |
| ◇ stem elongation – until flag leaf stage |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| Autumn: ◇/◆ 4–8 leaves unfolded The treatment should be considered as optimal in case of crops grown on soils with a pH above 7 and / or high phosphorus content in soil. |
Single dose – 0.4–1.2 L/ha |
| Spring: ◇/◆ beginning of main stem elongation The treatment should be considered as optimal in case of crops grown on soils with a pH above 7 and / or high phosphorus content in soil, high nitrogen fertilization, as well as during the cold weather or spring frost. |
|
| ◇/◆ bud formation – until beginning of flowering The treatment should be considered as optimal in case of crops grown on soils with a pH above 7 and / or high phosphorus content in soil, high nitrogen fertilization, as well as during the cold weather or spring frost. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇/◆ leaf development – until beginning of main stem elongation The treatment should be considered as optimal in case of crops grown on soils with a pH above 7 and / or high phosphorus content in soil, high nitrogen fertilization, as well as during the cold weather or spring frost. |
Single dose 0.4–1.2 L/ha |
| ◇/◆ bud formation – until beginning of flowering The treatment should be considered as optimal in case of crops grown on soils with a pH above 7 and / or high phosphorus content in soil, high nitrogen fertilization, as well as during the cold weather or spring frost. |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 4–6 leaves unfolded (BBCH 14–16) | Single dose – 0.4–1.2 L/ha |
| ◆ beginning of stem elongation (BBCH 30–33) | |
| ◇ beginning of inflorescence development (BBCH 51–53) |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development on the main stem (BBCH 13–19) | Single dose – 0.4–1.2 L/ha |
| ◆ stem growth (BBCH 30–39) | |
| ◆ beginning of inflorescence development (BBCH 51–53) |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 1–3 pairs of side shoots visible (BBCH 21–23) | Single dose – 0.4–1.2 L/ha |
| ◆ 4–9 and more pairs of side shoots visible (BBCH 24–29) | |
| ◆ inflorescence buds visible (BBCH 51–55) |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 2–6 leaves unfolded (4 leaves is the optimum stage for treatment) | Single dose – 0.4 –1.2 L/ha |
| ◆ 7–8 leaves unfolded | |
| ◆ stem elongation – until beginning of tassel formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of leaf development | Single dose – 0.4 –1.2 L/ha |
| ◆ beginning of crop cover | |
| ◇ beginning of storage root development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of growth of shoots and leaves (plant height about 10 cm) | Single dose – 0.4 –1.2 L/ha |
| ◆ beginning of tuber formation | |
| ◆ beginning of tuber growth | |
| ◇ tubers reach ca. 50% of the final mass |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first trifoliate leaf development | Single dose – 0.2–1.2 L/ha |
| ◆ beginning of flower bud development | |
| ◇ beginning of pod and seed development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first true leaf development | Single dose – 0.2–1.2 L/ha |
| ◆ beginning of flower bud development | |
| ◇ beginning of pod and seed development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first true leaf development | Single dose – 0.2–1.2 L/ha |
| ◆ beginning of flower bud development | |
| ◇ beginning of pod and seed development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first true leaf development | Single dose – 0.2–1.2 L/ha |
| ◆ beginning of flower bud development | |
| ◇ beginning of pod and seed development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first true leaf development | Single dose – 0.2–1.2 L/ha |
| ◆ beginning of flower bud development | |
| ◇ beginning of pod and seed development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ after start of growing season – bud break | Single dose – 0.6–1.2 L/ha |
| ◆ “mouse ear” stage | |
| ◇ white bud stage | |
| ◆ end of flowering: majority of petals fallen | |
| ◆ after harvest | |
| ◆ before beginning of leaf colour turning |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud swelling / burst | Single dose – 0.6–1.2 L/ha |
| ◆ inflorescence emergence | |
| ◆ fruitlet development | |
| ◇ the fruit reaches about half of final size | |
| ◆ before beginning of leaf color turning: 1–3 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud swelling / burst | Single dose – 0.6–1.2 L/ha |
| ◆ inflorescence emergence | |
| ◆ fruitlet development | |
| ◇ the fruit reaches about half of final size | |
| ◆ before beginning of leaf color turning: 1–3 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud swelling / burst | Single dose – 0.6–1.2 L/ha |
| ◆ inflorescence emergence | |
| ◆ fruitlet development | |
| ◆ the fruit reaches about 30% of final size | |
| ◆ before beginning of leaf color turning: 1–2 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Single dose – 0.6–1.2 L/ha |
| ◆ fruitlet development | |
| ◆ the fruit reaches about 30% of final size | |
| ◆ before beginning of leaf color turning: 1–2 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ inflorescence emergence | Single dose – 0.6–1.2 L/ha |
| ◆ fruitlet development | |
| ◆ the fruit reaches about 30% of final size | |
| ◆ before beginning of leaf color turning: 1–2 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud burst and inflorescence emergence | Single dose – 0.6–1.2 L/ha |
| ◆ fruitlet development | |
| ◆ the fruit reaches about 30% of final size | |
| ◆ before beginning of leaf color turning: 1–2 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ first new leaves visible | Single dose – 0.6–1.2 L/ha |
| ◆ beginning of flowering | |
| ◆ beginning of fruit development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud break | Single dose – 0.6–1.2 L/ha |
| ◆ inflorescence emergence | |
| ◆ beginning of flowering | |
| ◆ beginning of fruit development | |
| ◆ post-harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Spring: after start of growing season – bud burst | Foliar treatments – single dose – 0.6–1.2 L/ha |
| ◆ leaf and shoot development | |
| ◆ beginning of inflorescence emergence | |
| ◆ before beginning of leaf colour turning: 1–2 treatments every 10–14 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud breaking | Foliar treatments – single dose – 0.6–1.2 L/ha |
| ◆ beginning of leaf colour turning: 1–2 treatments every 10–14 days |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ bud breaking | Foliar treatments – single dose – 0.6–1.2 L/ha |
| ◆ beginning of leaf colour turning: 1–2 treatments every 10–14 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of leaf and new shoot development | Foliar treatments – single dose – 0.6–1.2 L/ha |
| ◆ inflorescence emergence | |
| ◇ fruit development – until berries pea-sized | |
| ◆ post-harvest |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ leaf development | Foliar treatments – single dose 0.6–1.2 L/ha |
| ◆ beginning of inflorescence emergence | |
| ◇ fruiting period – immediately after the first harvest | |
| ◆ before beginning of leaf colour turning – when plants are leaving for the next growing season: 1–2 treatments every 10–14 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ leaf development | Foliar treatments – single dose 0.6–1.2 L/ha |
| ◆ further leaf development and beginning of the first inflorescence development | |
| ◇ fruiting period: 1–2 treatments every 14–21 days |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Autumn in the planting year: before beginning of leaf colour turning | Foliar treatments – single dose 0.6–1.2 L/ha |
| ◆ Spring: leaf development | |
| ◆ Spring: beginning of runner growth | |
| ◇ Summer: development, growth and rooting of plantlets |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ FIELD GROWN NURSERY PLANTATIONS – autumn in the planting year: before beginning of leaf colour turning | Foliar treatments – single dose 0.6–1.2 L/ha |
| ◆ FIELD GROWN NURSERY PLANTATIONS – spring: leaf development | |
| ◆ FIELD GROWN NURSERY PLANTATIONS – spring: beginning of runner growth |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ Autumn in the planting year: before beginning of leaf colour turning | Foliar treatments – single dose 0.6–1.2 L/ha |
| ◆ Spring: leaf development | |
| ◆ Spring: beginning of runner growth | |
| ◇ Summer: development, growth and rooting of plantlets | |
| ◆ Beginning of autumn: runners with rooted plantlets cover inter-row spaces (if there is possibility for foliar application) |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to the field conditions – intensive plant growth | Foliar treatments – single dose 0.2–1.2 l/ha |
| ◇ beginning of inflorescence emergence |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to the field conditions – intensive plant growth | Foliar treatments – single dose 0.2–1.2 l/ha |
| ◇ the first flower bud emergence |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of growth of plants: 1–2 treatments every 7–14 days | Single dose 0.2–1.2 l/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Single dose – 0.2–1.2 L/ha |
| ◇ beginning of the flower head development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Single dose 0.2–1.2 L/ha |
| ◇ beginning of the flower head development |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Sinlge dose 0.2–1.2 L/ha |
| ◇ beginning of the head formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Single dose 0.2–1.2 L/ha |
| ◇ beginning of the head formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Single dose 0.2–1.2 L/ha |
| ◇ beginning of the head formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | Single dose – 0.2–1.2 L/ha |
| ◇ beginning of the head formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of the main stem and leaves | Single dose – 0.2–1.2 L/ha |
| ◇ beginning of axillary bud (‘sprouts’) formation |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | 0.2–1.2 L/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ growth of leaves | 0.2–1.2 L/ha |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ after seedling adaptation to field conditions – leaf development | Single dose – 0.2–1.2 L/ha |
| ◇ growth of the main stem and leaves |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◇ 3rd–5th leaf unfolded | Foliar treatments – single dose 0.2–1,2 L/ha. |
| ◆ beginning of storage root formation | |
| ◆ the storage root reaches about 50% of its typical size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of storage root formation | Foliar treatments – single dose 0.2–1,2 L/ha. |
| ◇ the storage root reaches about 50% of its typical size |
| Application times for foliar treatments (◆ optimal, ◇ optional): | Direction for use: |
| ◆ beginning of storage root formation | Foliar treatments – single dose 0.2–1,2 L/ha. |
| ◇ the storage root reaches about 50% of its typical size |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◆ 7–8 true leaves (BBCH 17–18) | Single dose – 0.2–1.2 L/ha |
| ◇ 9 true leaves / root begins to expand (BBCH 19/41) |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ 5 true leaves / beginning of crop cover (BBCH 15/31) | Single dose 0.2–1.2 L/ha |
| ◇ storage root begins to develop, diameter above 2 cm (BBCH 41–43) |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ 1–2 treatments every 7–21 days in spring | watering 0.05–0.1% solution OR spraying 0.25–0.3% solution |
| ◇ 1–2 treatments every 7–21 days in autumn |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ 1–2 treatments every 7–21 days in spring | watering 0.05–0.1% solution OR spraying 0.25–0.3% solution |
| ◇ 1–2 treatments every 7–21 days in autumn |
| Application times (◆ optimal, ◇ optional): | Direction for use: |
| ◇ 1–2 treatments every 7–21 days in spring | watering 0.05–0.1% solution OR spraying 0.25–0.3% solution |
| ◇ 1–2 treatments every 7–21 days in autumn |
DISCOVER MORE
VIEW ALL PLANT PRODUCTS →RELATED PRODUCTS
Plant Products
MIKROVIT® BORON TURBO
Liquid, foliar boron fertilizer containing 150 g of Boron in 1L
VIEW DETAILS →
Plant Products
Tytanit
TYTANIT® is a patented growth biostimulant containing TITANIUM (Ti) in a form of unique molecule aTIUM®, what ensures it’s high effectiveness.
VIEW DETAILS →
Plant Products
OPTYSIL
OPTYSIL® is an innovative silicon immunity biostimulant, containing active silicon form, which owes its effectiveness to unique formula duoSIL™
VIEW DETAILS →